Bodge Jobs
If you can't fix it with a hammer and a roll of duck tape, it's not worth fixing at all, my old mate said minutes before that nasty business with the hammer and a roll of duck tape. Tell us of McGyver-like repairs and whether they were a brilliant success or a health and safety nightmare.
( , Thu 10 Mar 2011, 11:58)
If you can't fix it with a hammer and a roll of duck tape, it's not worth fixing at all, my old mate said minutes before that nasty business with the hammer and a roll of duck tape. Tell us of McGyver-like repairs and whether they were a brilliant success or a health and safety nightmare.
( , Thu 10 Mar 2011, 11:58)
« Go Back | See The Full Thread
Sounds fun...
but I'd rather blow up the Lib Dems. This year am planning a 4x rocket 2x can extravaganza. Need a staging / testing ground this time - any ideas as to a remote, safe place with plenty of natural hidey-holes?
( , Tue 15 Mar 2011, 15:55, 3 replies)
but I'd rather blow up the Lib Dems. This year am planning a 4x rocket 2x can extravaganza. Need a staging / testing ground this time - any ideas as to a remote, safe place with plenty of natural hidey-holes?
( , Tue 15 Mar 2011, 15:55, 3 replies)
Add fins
You need the fins to be well behind the centre of mass - which shouldn't be a problem with a fuck-off can at the front! Maybe remove the stick and attach 3 light but rigid wires with tincan fins at the end. The rocket will then fly much more stably (and will steer *into* any wind, by the way).
You'll also need to keep the centre of mass on the same line as the thrust. May I suggest two or more smaller containers, strapped symmetrically around the top of the rocket?
( , Tue 15 Mar 2011, 16:21, closed)
You need the fins to be well behind the centre of mass - which shouldn't be a problem with a fuck-off can at the front! Maybe remove the stick and attach 3 light but rigid wires with tincan fins at the end. The rocket will then fly much more stably (and will steer *into* any wind, by the way).
You'll also need to keep the centre of mass on the same line as the thrust. May I suggest two or more smaller containers, strapped symmetrically around the top of the rocket?
( , Tue 15 Mar 2011, 16:21, closed)
This all sounds fantastic..
but I'm worried that if I do actually acheive a decent amount of height and speed, the device could explode nowhere near the launch pad. I have horrible visions of dousing some poor OAP's thatched roof in liquid fire, and the subsequent local news stories that would follow.
I guess we could blame terrorists.
( , Tue 15 Mar 2011, 16:28, closed)
but I'm worried that if I do actually acheive a decent amount of height and speed, the device could explode nowhere near the launch pad. I have horrible visions of dousing some poor OAP's thatched roof in liquid fire, and the subsequent local news stories that would follow.
I guess we could blame terrorists.
( , Tue 15 Mar 2011, 16:28, closed)
I like this a lot, but there is one thing to learn
The thrust from your single rocket is tiny, hence the thing falling out of the sky. You need to double or treble the first stage. Otherwise you will have it hovering about at ground level until the final explosion. Good luck, wear goggles and post the video here.
( , Wed 16 Mar 2011, 8:15, closed)
The thrust from your single rocket is tiny, hence the thing falling out of the sky. You need to double or treble the first stage. Otherwise you will have it hovering about at ground level until the final explosion. Good luck, wear goggles and post the video here.
( , Wed 16 Mar 2011, 8:15, closed)
If I were doing it
I would fiddle the fuses so that the rockets went off in two stages, sending the whole assembly higher and removing the "holy shit it's coming back" problem.
( , Wed 16 Mar 2011, 2:13, closed)
I would fiddle the fuses so that the rockets went off in two stages, sending the whole assembly higher and removing the "holy shit it's coming back" problem.
( , Wed 16 Mar 2011, 2:13, closed)
« Go Back | See The Full Thread